Express 3/4 Ton Van V8-4.8L VIN V (2003)
Shift Cable: Service and Repair
4L80-E/4L85-E
Automatic Transmission Range Selector Cable Replacement
Removal Procedure
1. Apply the parking brake.
2. Position the steering column shift lever to park.
3. Remove the knee bolster trim panel.
4. Remove the knee bolster bracket.
5. Remove the clip securing the shift cable to the steering column bracket.
6. Remove the shift cable from the steering column shift control.
7. Remove the rubber grommet from the floor panel.
8. Remove the air cleaner assembly.
9. Remove the shift cable clips from the left front of the engine compartment.
10. Raise the vehicle. Refer to Vehicle Lifting.
11. Remove the shift cable clips from the left rear engine bracket.
