chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - A/T Shift Cable Separation|Page 4574 > < Recall - A/T Shift Cable Separation|Page 4572
Page 4
background image

3.

Pull the driver's side carpet down and rearward to expose the floor pan, transmission, and shift cable (1).

4.

Locate the date code (1) printed on the shift cable as shown. The code follows a part number also printed on the cable.

^

If the cable has a date code that is 4129 through 4139, the cable MUST be replaced. Proceed to the section titled Shift Cable Replacement.

^

If the cable has a date code before 4129 or after 4139, the cable does NOT need to be replaced and no further action is required. Reinstall the
carpet and hinge pillar trim panel.

Shift Cable Replacement

1.

Remove the "AIR BAG fuse from the fuse block.

Recall - A/T Shift Cable Separation|Page 4574 > < Recall - A/T Shift Cable Separation|Page 4572