chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - A/T Shift Cable Separation|Page 4531 > < Recall - A/T Shift Cable Separation|Page 4529
Page 6
background image

12.

Pull (slide) the white cover (2) on the shift cable back to expose the natural colored lock (1).

13.

While holding the white cover (2) back, place a small flat-bladed screwdriver under the lock ramp located at the top of the lock (1) and pry the
lock up.

14.

Turn the adjuster so that you can see the threaded section (1) of the lower cable inside the adjuster.

15.

Pull the threaded section of the lower cable out of the upper cable. The inner lower cable will not disengage at this point.

Recall - A/T Shift Cable Separation|Page 4531 > < Recall - A/T Shift Cable Separation|Page 4529