Express 3/4 Ton Van V8-4.8L VIN V (2003)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transmission, if equipped.
Important: Note the position and direction of the engine flywheel before removal.
2. Remove the engine flywheel bolts.
3. Remove the automatic transmission engine flywheel.
4. Clean and inspect the engine flywheel.
5. Install 2 M11x1.5 mm bolts (1) to the threaded holes of the spacer, if applicable.
6. Rotate the bolts clockwise to remove the spacer.
7. Remove the spacer from the rear of the crankshaft, if applicable.
Installation Procedure
