Express 3/4 Ton Van V8-4.8L VIN V (2003)
The wiper arms are stamped with LH and RH.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the nut on the wiper arm.
Hold the wiper arm near the air inlet grille while tightening the nut.
Tighten
Tighten the nut to 26 N.m (19 lb ft).
4. Install the cover on the nut.
5. Install the washer hose elbow onto the air inlet grille panel.
6. Operate the wipers and inspect for proper operation.