Express 3/4 Ton Van V8-5.7L VIN R (1998)
Rear Door Panel: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: Do not break the upper trim panel.
1. Gently pull out the trim panel at the top of the window opening. Using a long, narrow screwdiver, pry the retaining clips apart in order to
disengage the clips.
2. Lift the side rear door trim panel up.
3. Remove the side rear door trim panel from the door.
4. Remove the side rear door trim panel from the vehicle.
5. Inspect the side rear door trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
INSTALLATION PROCEDURE
1. Install the side rear door trim panel to the vehicle.
2. Align the tabs on the side rear door trim panel with the slots in the door.
3. Lower the side rear door trim panel into place.
4. Press on the top of the side rear door trim panel in order to engage the retaining clips.
