Express 3/4 Ton Van V8-5.7L VIN R (1998)
1. Install the rear brake front pipe to the vehicle.
2. Install the retainer of the brake pipe to the frame.
3. Connect the brake pipe to the rear brake hose.
-
Tighten the rear brake pipe to the rear brake hose to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Connect the brake pipe to the EBCM unit.
-
Tighten the rear brake pipe to the EBCM unit to 20 Nm (15 ft. lbs.).
5. Bleed the hydraulic system. Refer to Hydraulic Brake System Bleeding (Manual Bleeding) or Hydraulic Brake System Bleeding (Pressure
Bleeding).
