Express 3/4 Ton Van V8-5.7L VIN R (1998)
Remove or Disconnect
1. The instrument cluster trim plate.
2. The heater and A/C control from the instrument panel by the following procedures:
^
The retaining screw from the left edge of the control head.
^
Pivot the control head from the I/P.
^
Pull the control head out of the instrument panel far enough to reach the vacuum and the electrical connectors.
3. The electrical connectors.
4. The vacuum connectors.
Install or Connect
1. The vacuum connectors.
2. The electrical connectors.
3. The control head to the instrument panel by the following procedures.
^
Align the tab on the control with slot in the instrument panel.
^
Pivot the control head into the instrument panel.
^
The retaining screw to the left edge of the control head.
Tighten
^
The heater and A/C control head retaining screw to 4 N.m (35 lb in).
4. Instrument cluster trim plate.
