Express 3/4 Ton Van V8-5.7L VIN R (1998)
6. Install the new O-ring seal on the engine fuel feed and the return pipes.
Tighten
Tighten the engine fuel pipe retainer nuts to the fuel meter body to 3.0 N.m (27 lb in).
7. Install the fuel feed and the return hoses to the engine fuel pipes.
Tighten
Tighten the fuel pipe nuts to 30.0 N.m (22 lb ft).
8. Connect the negative battery cable.
8.1. Turn ON the ignition switch for 2 seconds.
8.2. Turn the ignition switch to the OFF position for 10 seconds.
8.3. Turn the ignition switch back to the ON position.
8.4. Check for fuel leaks.
8.5. Tighten the fuel filler cap.