chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sensors and Switches - Restraint Systems > < Removal Procedure|Page 10346
Page 3
background image

Description

1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor retaining bolts to the vehicle.

Tighten
Tighten the seat belt retractor retaining bolt to 52 N.m (38 lb. ft).
NOTICE:
  Refer to Fastener Notice in Service Precautions.

3. Install the rear corner garnish molding. Refer to Rear Corner Garnish Molding Replacement in Interior Trim.

Sensors and Switches - Restraint Systems > < Removal Procedure|Page 10346