Express 3/4 Ton Van V8-5.7L VIN R (1998)
Band Apply Servo: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J29714-A Servo Cover Depressor
1. Raise the vehicle.
2. Lower the transmission if needed for clearance.
Refer to Transmission Replacement
3. Install the J29714-A.
4. Tighten the bolt in order to compress the servo cover.
5. Remove the servo cover retaining ring.
6. Remove the J29714-A.
7. Remove the servo cover and the O-ring seal. If the servo cover seems to be hung up on the seal, cut and remove the O-ring seal before removing
the cover.
8. Remove the 2-4 servo assembly.
DISASSEMBLY PROCEDURE
^
Tools Required
-
J22269-01 Piston Remover