Express 3/4 Ton Van V8-5.7L VIN R (1998)
5. Install the following parts:
5.1.
The servo return spring
5.2.
The 4th apply piston
INSTALLATION PROCEDURE
^
Tools Required
-
J29714-A Servo Cover Compressor
1. Install the 2-4 servo assembly into the 2-4 servo bore.
2. Install the J29714-A
3. Tighten the bolt in order to compress the servo cover.
4. Install the servo cover retaining ring.
5. Remove the J29714-A from the oil pan flange.
6. Install the oil pan bolt.
^
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
