Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
12. Remove the valve lifters from the engine block.
^
Place the valve lifters in an organizer rack.
^
The valve lifters must be installed in the same bores from which they were removed.
Installation Procedure
Notice: Prime the new valve lifters before installation. The valve lifters may be damaged if the valve lifters are dry when the engine is started.
Important: The valve lifters must be installed in their original locations.
1. Install the valve lifters into the engine block.
Important: The straight edge of the guide plates and clamps face away from the cylinder.
2. Install the guide plates in the engine block.
Important: After all the clamps are installed, turn the crankshaft by hand two full revolutions, to ensure free movement of the valve lifters in the
plate. If the engine will not turn over by hand, one or more of the valve lifters may be binding in the plate.
Notice: Refer to Fastener Notice in Service Precautions.
