Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
3. Install the valve lifter retainer and bolt in the engine block.
^
Tighten the clamp bolt to 26 Nm (18 ft. lbs.).
4. Install the cylinder head to the engine block.
5. Install the valve rocker arm, shaft and pushrods in the valve lifters.
6. Install the valve rocker arm cover to the cylinder head.
7. Remove the turbocharger from the engine block.
8. Install the lower intake manifold to the cylinder head.
9. Install the upper intake manifold to the turbocharger.
10. Refill the cooling system.
11. Change the oil filter and oil.
12. Connect the battery negative cables to the batteries.