Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
Oil Pressure Switch (For Fuel Pump): Service and Repair
Engine Protection System Temperature Switch Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cables.
2. Drain the cooling system below the level of the coolant temperature switch.
3. Remove the engine cover.
4. Remove the hold down nut and washer on the coolant temperature switch.
5. Remove the harness connector (1) from the coolant temperature switch.
6. Remove the coolant temperature switch (1).
INSTALLATION PROCEDURE