Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the coolant temperature switch (1).
2. Tighten
Tighten the sensor to 25 N.m (18 lb ft).
3. Install the harness connector (1) onto the coolant temperature switch.
4. Install the nut and washer onto the coolant temperature switch.
Tighten
Tighten the nut to 0.75 N.m (6.6 lb in).
5. Refill the coolant system.
6. Install the engine cover.
7. Connect the negative battery cables.