Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
3. Install the camshaft sprocket with the timing chain.
NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
4. Install the timing chain sprocket bolt to the camshaft.
-
Tighten the bolt to 171 Nm (125 lb ft).
5. Install the engine front cover to the engine block.
6. Install the fuel injection pump drive gear to the camshaft.
-
Tighten the bolts to 25 Nm (20 lb ft).
7. Install the water pump to the engine front cover.
8. Install the drive belt on the pulleys.
