chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Water Pump|Specifications|Page 2051 > < Water Pump|Specifications|Page 2049
Page 9
background image

15. Connect the battery negative cable to the battery.

16. Connect the battery negative cable to the auxiliary battery terminal.
17. Refill the engine cooling system.
18. Bleed the air from the engine cooling system by the following:

18.1. Remove the cap from the surge tank.
18.2. Remove the bleed screw (slotted) from the top of the thermostat housing.
18.3. Pour anti-freeze into the surge tank, and watch for a of anti-freeze from the bleed screw.
18.4. When a constant flow of anti-freeze is reached, closed the bleed screw at the top of the thermostat housing.
18.5. Continue to fill the surge tank to the proper level.
18.6. Install the cap on the surge tank.

19. Install the air intake duct to the turbocharger.

Water Pump|Specifications|Page 2051 > < Water Pump|Specifications|Page 2049