Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
9. Remove the exhaust manifolds from the cylinder head.
10. Inspect and clean the sealing surfaces on the cylinder head and the exhaust manifold.
Installation Procedures
1. Install the exhaust manifold to the cylinder head (right side shown).
2. Install the exhaust manifold bolts (right side shown).
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten the bolts to 35 Nm (26 ft. lbs.).
3. Install the exhaust pipe from the turbocharger to the exhaust manifold.