chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 1331 > < Fluid - A/T|Capacity Specifications|Page 1329
Page 1
background image

Fluid - A/T: Service and Repair

Removal Procedure 

1. Raise and the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan under the transmission oil pan.
3. Remove the oil pan drain plug.
4. Remove the oil pan bolts.

5. Remove the oil pan.
6. Remove the gasket.
7. Remove the magnet.

8. Remove the oil filter.
9. Remove the filter neck seal.

10. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed.
11. Clean the transmission case and the oil pan gasket surfaces with solvent.

Installation Procedure 

Fluid - A/T|Capacity Specifications|Page 1331 > < Fluid - A/T|Capacity Specifications|Page 1329