chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine Protection System Oil Pressure Switch Replacement|Page 3825 > < Engine Protection System Oil Pressure Switch Replacement
Page 2
background image

NOTE:  Refer to Fastener Notice in Service Precautions.

1. Install the oil pressure switch (1) while holding the fitting (2).

Tighten
Tighten the oil pressure switch to 7.5 N.m (66 lb in).

2. Install the harness connector (1) onto the oil pressure switch (2).
3. Install the coolant surge tank.
4. Connect the negative battery cables.

Engine Protection System Oil Pressure Switch Replacement|Page 3825 > < Engine Protection System Oil Pressure Switch Replacement