Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
INSTALLATION PROCEDURE
1. Install the wastegate actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Use thread sealant GM P/N 12345739 on the actuator bolt thread.
2. Install the wastegate actuator mounting bolt.
Tighten
Tighten the bolt to 23 N.m (17 lb ft).
3. Install the turbocharger heat shield.
IMPORTANT: Use a thread locker GM P/N 12345382 on the heat shield bolts and nut.
