Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
6. Remove the vacuum pump pulley:
6.1. Place the vacuum pump in a vise.
6.2. Attach the J 25034-C to the pulley.
6.3. Remove the pulley from the vacuum pump using the J 25034-C.
7. Install the vacuum pump pulley on the vacuum pump.
7.1. Attach the J 25033-C to the vacuum pump pulley.
7.2. Install the vacuum pump pulley to the vacuum pump.
7.3. Remove the J 25033-C.
8. Remove the vacuum from the vise.
Installation Procedure
1. Install the vacuum pump.
2. Install the ground strap from the vacuum pump to the frame.
Notice: Refer to Fastener Notice in Service Precautions.
