Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the harness connector from the crankshaft position sensor by releasing the locking tab.
3. Remove the sensor mounting bolt.
IMPORTANT: Take care when handling the sensor. Damage to the sensor will affect the operation of the injection timing control system.
4. Remove the sensor from the engine.
INSTALLATION PROCEDURE