Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
Oil Pressure Sender: Service and Repair
Removal Procedure
^
Tools Required
-
J 41712 Oil Pressure Sending Unit Socket
1. Remove the engine cover from the vehicle.
2. Remove the electrical connector from the oil pressure sending unit.
3. Use the J 41712 to remove the oil pressure sending unit from the engine block.
Installation Procedure
^
Tools Required
-
J 41712 Oil Pressure Sending Unit Socket
1. Use the J 41712 to install the oil pressure sending unit to the engine block.
^
Tighten the oil sending unit to 12 Nm (9 ft. lbs.)
2. Install the electrical connector to the oil pressure sending unit.
3. Install the engine cover in the vehicle.
