chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Generator Replacement|Page 5589 > < Generator Assembly Bench Check|Page 5586
Page 1
background image

Alternator: Service and Repair
Generator Replacement

REMOVAL PROCEDURE

1. Disconnect the battery negative cable. 
2. Remove the surge tank. 
3. Remove the air cleaner. 
4. Remove the upper fan shroud. 
5. Remove the drive belt from the generator. 
6. Remove the generator mounting bolts.
7. Remove the generator from the engine.

8. Disconnect the electrical connectors.

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice in Cautions and Notices.

Generator Replacement|Page 5589 > < Generator Assembly Bench Check|Page 5586