Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
3. Connect the electrical connectors to the starter solenoid.
Tighten
-
Tighten the battery cable to the solenoid to 10 N.m (89 lb in).
-
Tighten the ignition switch wires to the solenoid to 6 N.m (53 lb in).
4. Install the starter motor bolts to the engine.
Tighten
Tighten the bolts to 45 N.m (33 lb ft).
5. Install the nut retaining the starter to the starter motor bracket.
Tighten
Tighten the nut to 10 N.m (89 lb in).
6. Connect the battery negative cable.