Express 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1999)
Band Apply Servo: Service and Repair
Forward Servo Replacement
Removal Procedure
1. Lift the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
3. Remove the six forward servo cover bolts, cover, and gasket.
4. Remove the following parts:
4.1.
Forward servo piston pin (5).
4.2.
O-ring seal (4).
4.3.
Servo piston (3).
4.4.
Retainer (2).
4.5.
Piston spring (1).
Installation Procedure
1. Install the following parts:
^
Piston spring (1).
^
Retainer (2).
^
Servo piston (3).
^
O-ring seal (4).
^
Forward servo piston pin (5).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the six forward servo gasket, cover, and six bolts.
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
3. install the oil pan and filter. Refer to Automatic Transmission Fluid/Filter Changing.
4. Lower the vehicle.
