Express 3500 V8-4.8L (2007)
Door Stop: Service and Repair
Sliding Door Stop Replacement
Sliding Door Stop Replacement
Removal Procedure
1. Remove the passenger side body side trim panel.
2. Remove the nut that retains the sliding door stop to the body.
3. Remove the sliding door stop from the vehicle.
Installation Procedure
1. Install the sliding door stop to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the nut in order to retain the sliding stop to the body.
Tighten the retaining nut to 25 N.m (18 lb ft).
3. Install the passenger side body side trim panel.