Express 3500 V8-4.8L (2007)
Important:
^
All gasket surfaces should be free of oil or other foreign material during assembly.
^
DO NOT reuse the valve rocker arm cover gasket.
^
The valve rocker arm cover bolt grommets may be reused.
1. Install a NEW rocker cover gasket (1) into the valve rocker arm cover.
2. Install the valve rocker arm cover onto the cylinder head.
3. Install new rocker arm cover grommets, if necessary.
Notice: Refer to Fastener Notice.
4. Install the rocker arm cover bolts and grommets.
Tighten the valve rocker arm cover bolts to 12 N.m (106 lb in).
