Express 3500 V8-4.8L (2007)
Heat Shield: Service and Repair
Exhaust Heat Shield Replacement - Frame
Exhaust Heat Shield Replacement - Frame
Removal Procedure
1. Raise and suitably support the vehicle with safety stands. Refer to Vehicle Lifting.
2. Remove the exhaust system, as necessary.
3. Remove the bolts retaining the heat shield.
4. Remove the heat shield.
Installation Procedure
1. Install the heat shield.
Notice: Refer to Fastener Notice.
2. Install the heat shield bolts.
Tighten the heat shield retainer bolt to 12 N.m (106 lb in).
3. Install the exhaust system, as necessary.
4. Remove the safety stands and lower the vehicle. Refer to Vehicle Lifting.