Express 3500 V8-4.8L (2007)
Notice: Refer to Fastener Notice .
1. Attach the steering column support assembly (2) to the steering column jacket assembly (3) with the 4 TORX(R) head screws (1).
Tighten the screws to 17 N.m (13 lb ft).
2. Install the steering shaft assembly (1) into the steering column support assembly (2).
3. Install the adapter and bearing assembly (1) onto the jacket assembly by performing the following procedure:
1. Align the tab on the adapter and bearing assembly (1) with the slot in the jacket assembly.
2. Push the adapter and bearing assembly (1) onto the steering shaft assembly until the tab snaps into the slot.
4. Install the shaft seal retainer (2) onto the adapter and bearing assembly (1):
1. Align the slots of the shaft seal retainer (2) to the ribs of the adapter and bearing assembly (1).
2. Push the shaft seal retainer (2) onto the steering shaft assembly.
