Express 3500 V8-4.8L (2007)
Installation Procedure
Notice: Refer to Fastener Notice .
Important: The steering column support assembly must be replaced if it has been staked 3 times.
1. Attach the steering column support assembly (1) to the steering column jacket assembly (3) with the 4 TORX(R) head screws (2).
Tighten the screws to 17 N.m (13 lb ft).
2. Lubricate the centering sphere (1) with GM P/N 12345718 (Canadian P/N 10953516).
3. Insert the centering sphere (1) and the joint preload spring (2) into J 41688 .
4. Place the base of J 41688 into a vise.