Express 3500 V8-4.8L (2007)
Wheel Bearing: Service and Repair
Wheel Hub, Bearing, and Seal Replacement (RWD)
Removal Procedure
Notice: Never place vehicle on the ground with the halfshaft removed or the halfshaft nut torqued improperly. Otherwise, bearing seals may
become dislodged causing premature wear and/or damage to the hub and bearing assembly.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel.
3. Remove the rotor.
4. Remove the wheel speed sensor mounting bolt.
5. Remove the wheel speed sensor from the wheel hub and bearing.
6. Remove the wheel hub and bearing mounting bolts.
7. Remove the wheel hub and bearing and splash shield from the steering knuckle.
Installation Procedure