Express 3500 V8-4.8L VIN V (2005)
1. Lubricate the valve lifters and engine block valve lifter bores with clean engine oil.
2. Insert the valve lifters into the lifter guides. Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the lifter
completely into the guide bore.
3. Install the valve lifters and guide to the engine block.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the valve lifter guide bolt (1).
Tighten the valve lifter guide bolt (1) to 12 Nm (106 inch lbs.).
5. Install the cylinder head and gasket.