Express 3500 V8-4.8L VIN V (2005)
8. Remove the MAP sensor (1) from the intake manifold.
9. Remove the accelerator control cable bracket bolts (1).
10. Remove the accelerator control cable bracket (2) from the intake manifold.
11. Remove the evaporative emission (EVAP) purge solenoid vent tube by performing the following:
1. Remove the EVAP tube end (2) from the solenoid (1).
2. Squeeze the EVAP pipe quick connect fitting (3) retainer together.
3. Remove the EVAP tube end (3) from the vapor pipe.
12. Remove the EVAP purge solenoid bolt (2), solenoid (3), and isolator (1) from the intake manifold.
