Express 3500 V8-4.8L VIN V (2005)
6. Install the fuel feed and return pipes to the engine compartment fuel pipes.
Tighten the fuel pipe fittings to 27 N.m (20 lb ft).
7. Install the fuel pipes to the retainer clip.
Tighten the fuel pipe retainer clip nut to 28 N.m (21 lb ft).
8. Tighten the fuel filler cap.
9. Connect the negative battery cable.
10. Inspect for leaks:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
11. Install the engine cover.