Fuel Hose/Pipes Replacement - Express 3500 V8-48L VIN V (2005)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis (Filter to Tank Cutaway Van Rear Tank)
FUEL HOSE/PIPES REPLACEMENT - CHASSIS (FILTER TO TANK CUTAWAY VAN REAR TANK)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Disconnect the fuel feed pipe at the fuel filter.
6. Disconnect the chassis fuel return pipe at the rear fuel return pipe.
7. Disconnect the chassis fuel feed and return pipes at the rear fuel feed and return pipes.
8. Remove the fuel pipe retaining clips.
9. Remove the fuel feed and return pipes.
INSTALLATION PROCEDURE
1. Install the fuel feed and return pipes and the fuel pipe retaining clips (2) to the frame rail (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 12 N.m (106 lb in).
2. Connect the chassis fuel feed and return pipes to the rear fuel feed and return pipes (2).
