chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Steering Pulley Replacement|Page 10606 > < Power Steering Pulley Replacement|Page 10604
Page 1
background image

Power Steering Pump: Service and Repair
Power Steering Pump Replacement

 

Power Steering Pump Replacement (4.8L, 5.3L, and 6.0L) 
Removal Procedure

1. Place a drain pan below under the vehicle.
2. Remove the power steering pump pulley.
3. Remove the lower intermediate shaft to the power steering gear retaining bolt.
4. Disconnect the lower intermediate shaft from the power steering gear.

5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Remove the tire and wheel.
7. Disconnect the reservoir outlet hose from the power steering pump through the wheel well.

8. Disconnect the power steering gear outlet hose or cooler hose the power steering pump through the wheel well.

Power Steering Pulley Replacement|Page 10606 > < Power Steering Pulley Replacement|Page 10604