Express 3500 V8-4.8L VIN V (2005)
Install the pitman shaft and the side cover.
7. Install the dust seal (1).
8. Install the pitman shaft boot (2).
9. Install the pitman arm (3) to the steering gear (1).
10. Install the lock washer (4).
11. Notice; Refer to Fastener Notice in Service Precautions.
Install the nut (5).
-
Tighten the pitman arm nut to 250 Nm (184 ft. lbs.).
12. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear) to adjust the pitman shaft.
