Express 3500 V8-4.8L VIN V (2005)
6. Disconnect the drive link from the wiper motor crank arm using the J 39232.
7. Remove the 4 bolts retaining the wiper transmission.
8. Remove the wiper transmission from the wiper drive system module.
INSTALLATION PROCEDURE
1. Install the wiper transmission onto the wiper drive system module with the 4 bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 7 N.m (62 lb in).
2. Connect the drive link onto the wiper motor crank arm using the J 39529.