Express 3500 V8-6.0L (2010)
1. Ensure the brake caliper guide pin caps (1) are in good condition and firmly seated on the brake caliper body.
Replace any missing or damaged brake caliper guide pin caps.
2. Without disengaging the brake caliper from the brake caliper guide pins, inspect the brake caliper hardware. Refer to Rear Disc Brake Mounting
and Hardware Inspection (With Single Rear Wheel) (See: Testing and Inspection/Rear Disc Brake Mounting and Hardware Inspection (With
Single Rear Wheel))Rear Disc Brake Mounting and Hardware Inspection (With Dual Rear Wheel) (See: Testing and Inspection/Rear Disc Brake
Mounting and Hardware Inspection (With Dual Rear Wheel)).
3. Install the brake pad springs (1).
