Express 3500 V8-6.0L (2010)
2. Install the rear engine mount to the engine mounting bolts from under the vehicle. Do not tighten at this time.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the front engine mount to the engine mounting bolts through the wheel well and tighten to 50 Nm (37 lb ft).
4. Lower the engine.
5. Install the engine mount to the frame mounting bolts through the wheel well and tighten to 60 Nm (44 lb ft).
6. Install the front propeller shaft, 4WD vehicles only. Refer to Front Propeller Shaft Replacement (See: Transmission and
Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Front Propeller Shaft Replacement).
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Lower the vehicle.
