Express 3500 V8-6.0L (2010)
3. To assemble the connector, reverse the connector disassembly procedure.
Tyco/AMP Connectors (CM 42-Way)
Tyco/AMP Connectors (CM 42-Way)
Special Tools
J-38125 Terminal Repair Kit
Removal Procedure
1. Locate the connector position assurance (CPA) on the connector body and pull the CPA out. The CPA is on the wire harness side of connector.
2. Disconnect the connector from the component.
3. Use a small flat-bladed tool to gently pry off the dress cover by inserting the tool under the cover opposite the harness side and prying up.
4. Remove the cover.
