chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Steering Pulley Replacement|Page 7152 > < Power Steering Pulley Replacement|Page 7150
Page 2
background image

9. Disconnect the power brake booster inlet hose (2) from the power steering pump through the wheel well.

10. Cap the ends of the hose and the pump in order to prevent the entrance of dirt.
11. Lower the vehicle.

12. Remove the rear power steering pump mounting bolt.
13. Remove the front power steering pump mounting bolts.
14. Remove the power steering pump from the vehicle.

15. Remove the power steering pump rear bracket mounting nuts.
16. Remove the power steering pump rear bracket from the power steering pump.

Installation Procedure

1. Install the power steering pump rear bracket to the power steering pump.

Power Steering Pulley Replacement|Page 7152 > < Power Steering Pulley Replacement|Page 7150