Express 3500 V8-6.0L VIN U (2004)
36. Inspect the bearing in the rear output shaft. Refer to Cleaning and Inspection.
37. If the bearing is faulty, remove the bearing using the J 45849.
^
Install the finger part of the J 45849 in the bearing.
^
Thread the driver part into the fingers.
^
Remove the bearing from the fingers by squeezing the fingers together.
38. Remove the retaining ring for the rear output shaft bearing and the speed reluctor wheel.
39. Using a hydraulic press and the J 22912-01, remove the speed reluctor wheel and the rear output shaft bearing
Do not use the speed reluctor wheel again