Express 3500 V8-6.0L VIN U (2004)
12. Install a NEW retaining ring for the rear output shaft bearing.
13. Install the rear output shaft in the annulus gear.
Caution: The vehicle could roll while in park if the annulus gear becomes disengaged from the rear output shaft. Always install a new rear output shaft
to annulus gear retaining ring. Ensure the rear output shaft retaining ring is fully seated in the annulus gear.
Notice: Damage may occur to the viscous coupling if the retaining ring for the rear output shaft to the annulus gear fails or becomes dislodged during
vehicle operation. Always install a new rear output shaft to annulus gear retaining ring. Ensure the rear output shaft retaining ring is fully seated in the
annulus gear.
14. Install a NEW annulus gear retaining ring.