Express 3500 V8-6.0L VIN U (2004)
36. Remove the shift fork shaft.
Notice: In order to prevent component damage, properly remove and install the shift detent lever shaft assembly. When removing or installing the shift
detent lever shaft assembly, keep the shaft straight and do not tilt. Tilting the shift detent lever shaft assembly in the transfer case housing will break the
tip on the end of the shaft.
37. Remove the shift detent lever assembly.
^
Rotate the high/low shift fork roller from the shift detent lever assembly.
^
Lift straight up on the shift detent lever assembly.
38. If necessary, disassemble the shift detent lever assembly.
38.1.
Hold the shift detent lever assembly by one tab of the spring (3), in a vise.
38.2.
Rotate the other spring tab and slide the detent lever cam (1) off the shaft.
38.3.
Remove the sleeve (2).
38.4.
Push the shaft (4) out of the spring (3).
