Express 3500 V8-6.6L DSL Turbo (2008)
Add terminal 8100-4445 from Sumitomo tray 22 to the end of the dark blue wire (circuit 47). Refer to Repairing Connector Terminals in SI.
Locate cavity 18 in the UBEC connector X3 (gray in color 62 cavities) as shown in the graphic above. Install the dark blue wire (circuit 47) with
terminal 8100-4445 into cavity 18.
Add terminal 8100-4445 from Sumitomo tray 22 to the end of the red/white wire (circuit 3940). Refer to Repairing Connector Terminals in SI.
Locate cavity 6 in the UBEC connector X3 (gray in color 62 cavities) as shown in the graphic above. Install the red/white wire (circuit 3940) with
terminal 8100-4445 into cavity 6.
Add terminal 8100-4444 from the Sumitomo tray 22 to the end of the light green wire (circuit 1624). Refer to Repairing Connector Terminals in SI.
