Express 3500 V8-6.6L DSL Turbo (2008)
Route the conduit (1) down behind the case bracket while securing the conduit to the IP harness with two tie straps.
Route the conduit up above the engine cover along the right side of the air duct while attaching the conduit to the main IP harness with a tie strap (1).
Continue to route the conduit up behind the radio and secure with a tie strap (1) to the IP harness.
Route the conduit down toward the drivers floor following the accelerator harness.
Pull the drivers side of the front floor carpet or rubber mat back.
